Project
A quality faucet makes all the difference. The internal parts are stronger and easier to find in case of breakage, not to mention that it is much more durable. To change a faucet, the steps are simple.
In the first place
Always shut off the water supply before changing the tap. Simply close the shut-off valves of the hot and cold water supply.
It is also necessary to ensure that the new faucet is compatible with its installation. Checking the distance between the two sink holes, which varies from one model to another, is also essential. To ensure that there is no constraint, it is also better to measure the height of the faucet.
If the change is made in a bathroom and the color or material of the new faucet differs, the drain plug must be changed so that the whole thing is more aesthetic.
PHOTO ROBERT SKINNER, THE PRESS
Tools to install a faucet
The tools
- Wrench
- teflon tape
- Caulking gun and silicone
How to do it
1. Turn off the water. To make sure that everything has been closed, turn on the tap (hot and cold water).
2. Loosen the hot side and cold side hoses. Please note: there is always a little water left in the pipes. Have a dry cloth handy to soak up the water.
PHOTO ROBERT SKINNER, THE PRESS
Loosen the hot side and cold side hoses.
3. Dismantle the old faucet. The assembly piece that secures the faucet to the sink or sink can be difficult to reach.
PHOTO ROBERT SKINNER, THE PRESS
Insert the new faucet
4. Insert the new faucet. If access is easy, insert a bead of silicone before tightening.
5. Tighten the assembly system.
-
PHOTO ROBERT SKINNER, THE PRESS
Tighten the assembly system.
-
PHOTO ROBERT SKINNER, THE PRESS
Tighten the assembly system.
1/2
6. In the case of a replacement, you must also change the strainer, which connects the sink to the waste pipe. Apply a line of silicone, then teflon tape on the threaded part of the transmission.
-
PHOTO ROBERT SKINNER, THE PRESS
Attach the strainer.
-
PHOTO ROBERT SKINNER, THE PRESS
Wrap Teflon tape around the threaded portion of the drain.
-
PHOTO ROBERT SKINNER, THE PRESS
Apply a line of silicone to the strainer.
-
PHOTO ROBERT SKINNER, THE PRESS
Attach the drain to the strainer.
1/4
7. Assemble the press cap.
PHOTO ROBERT SKINNER, THE PRESS
Assemble the press cap.
Last step
Connect the water supply hoses. Check that the sealing ring is in place. Tighten firmly with a wrench. Open the valves. Check that there are no leaks.
A little further
There are different types of accessories for kitchen faucets. Among these, the hand shower that allows you to rinse thoroughly, or the integrated container of hand or dish soap that avoids clutter on the edges of the sink.
Another interesting accessory that we see more and more is the instant hot water dispenser. Heated, the water reaches a temperature of around 80°C. Convenient for cooking or for lovers of hot drinks. The equipment fits under the sink and the dispenser sits next to the faucet.